top of page

Thermodynamics Forum

To test this feature, visit your live site.

Thermodynamics Forum

Edited: Jul 12, 2023

Power calculation in Pelton Wheel - GATE ME '06

in Thermodynamics Forum

In a Pelton wheel, the bucket peripheral speed is 10 m/s, the water jet velocity is 25 m/s and the volumetric flow rate of the jet is 0.1 m^3/s. If the jet deflection angle is 120 and the flow is ideal, the power developed is: A. 7.5 kW B. 15.0 kW C. 22.5 kW D. 37.5 kW

Ans:

velocity triangle of pelton wheel

In a Pelton wheel, the bucket peripheral speed is 10 m/s, the water jet velocity is 25 m/s and the volumetric flow rate of the jet is 0.1 m^3/s. If the jet deflection angle is 120 and the flow is ideal, the power developed is: A. 7.5 kW B. 15.0 kW C. 22.5 kW D. 37.5 kW

0 answers0 replies

Like

Comments (0)

Thermodynamics Forum

2 min read

Thermodynamics Misconceptions Exposed

As engineers, our world revolves around the fundamental laws that govern energy and its transformations. Thermodynamics, the backbone of...

Thermodynamics Forum

2 min read

Unlocking the Secrets of Thermodynamics: A Beginner's Guide

Welcome, aspiring scientists and engineers! Today, we're delving into the fascinating world of thermodynamics, where heat, energy, and...

Thermodynamics Forum

2 min read

Best online resources to study Thermodynamics, Fluid Mechanics, and Heat Transfer

I have been researching about best reference books, best lecture series, and best universities to study thermal sciences since I was in...

Thermodynamics Forum

1 min read

Thermal Science

Approximate Values of Heat Transfer Coefficient

The higher the value of heat transfer the faster will be the heat transfer according to Newton's law of cooling.

Thermodynamics Forum

1 min read

Thermal Science

Volumetric Flow Rate - 5W1H

It is a measure of the quantity of the fluid that is being displaced from one place to other. This is an important parameter when designing

Thermodynamics Forum

4 min read

Thermal Science

Throttling Process

The pressure drop in the thermal system can be obtained by expanding the fluid in the expansion valve which produces thermodynamic work.

Thermodynamics Forum

3 min read

Thermal Science

Path Function vs Point Function

We come across a lot of properties and functions in Thermodynamics. These are divided mainly into path functions and point functions. All...

Thermodynamics Forum

2 min read

Thermal Science

The Carnot Principles

The efficiency of an irreversible heat engine is always less than the efficiency of a reversible engine operating between the same two

Thermodynamics Forum

3 min read

Thermal Science

Temperature-Entropy(T-s) Diagram

The T-s diagram is one of the most used plots in Thermodynamics. It is used to analyze vapor power cycles, gas power cycles, and

1

2

bottom of page